switched to MHD first log

[Zombie1]

Could one of you guys take a look for me. Also could anyone point me in the right direction on a page that shows you what/how to read a log?

http://datazap.me/u/zomb135i/3rd-4th...7-8-9-10-11-27

[Zombie1]

Will post a new log tomorrow, idk how I forget to disable traction control.

[Zombie1]

http://datazap.me/u/zomb135i/log-149...7-8-9-10-11-20

can somone look at this? idk if my cable is shorting out but i took this log up to 6500 and it cuts off before that.

[Sticky]

http://datazap.me/u/zomb135i/log-149...7-8-9-10-11-20

can somone look at this? idk if my cable is shorting out but i took this log up to 6500 and it cuts off before that.

Ok bump to help you

[Abacus38]

You have some timing correction but its an OTS map so its not going to be perfect and it looks like your hitting your boost target but your LPFP is dipping to the 50s on a 93 tune so you might want to look at replacing it in the future esp if you want to run E85

[Abacus38]

also take a look at this thread
http://www.bimmerboost.com/showthrea...highlight=logs

[Zombie1]

You have some timing correction but its an OTS map so its not going to be perfect and it looks like your hitting your boost target but your LPFP is dipping to the 50s on a 93 tune so you might want to look at replacing it in the future esp if you want to run E85

thank you for the help and link, i have a Fuel-it! bucketless stage 2 LPFP waiting to install it ill have to get it in asap.

[dyezak]

What are your mods and what gas are you using? Looks like not enough octane for the map selected. Are you stuck with 91o?

[Zombie1]

What are your mods and what gas are you using? Looks like not enough octane for the map selected. Are you stuck with 91o?

It's 93, i go to a local mom and pop gas station. Should i put a couple gallons of e85 in? obviously wont do this till i upgrade my pump with the fuel-it one.

[Abacus38]

You can but don't expect an OTS map to perfectly get rid of timing corrections

[dyezak]

What about your mods? FMIC, downpipes, intake....what do you have?

[Zombie1]

What about your mods? FMIC, downpipes, intake....what do you have?

Yeah I'm not excepting it to be perfect, I ordered a remote dyno tune from PTF suppose to get it done end of the month. As for mods FMIC(cobb), Chargepipe/blowoff valve,DCI, downpipes,full berk exhaust, and installing inlets before protune as well.