FS: HPF Stage 2+ Turbo kit *Lightly used* (<8k miles)

[leonelhpfm3]

So that everyone is clear, this is NOT The kit on my M3.

This is the kit off David Liggins 2006 E46 M3 from Seattle, Wa.

Car is being parted out.

This thread is for the HPF stage 2 Turbo kit

Relatively young kit, has only 8k miles on it

All that will be included is the following

Plug-n-play stand alone engine management system
Six Drop in 750cc "high impedance" injectors (no fuel rail mods required)
Auxiliary fuel pump w/filter that turns on at 3psi w/electronic connector
Ceramic coated, CNC machined 1018 mild steel turbo manifold
Precision 6766 turbo w/.81 AR
Precision 46MM wastegate / open dump
Stainless steel downpipe
Powdercoated Intake manifold
Intake manifold couplers w/clamps
Twin HKS blow off valves
Polished 4" thick, 24" wide core bar-n-plate intercooler
Powdercoated aluminum intercooler piping
Powdercoated aluminum intake piping
5 ply silicon couplers
T-bolt intercooler clamps
KN intake filter with clamp
Steering column mounted dual pod
AEM UEGO wide-band gauge
AEM boost gauge
Race fuel switch w/LED
Knock siren
Harnesses for fuel pump and oil pump assemblies
Harnesses for gauges, race fuel switch, LED and knock siren
Oil pump with mounting bracket and electronic connector
One piece oil pump feed and return lines
One piece turbo oil feed and one piece head to pan oil line
Multiple vacuum lines w/quick disconnects
AEM 3.5bar map sensor
Boost control solenoid
Intake air temp sensor
HPF Engine Mounts
Fittings and block off plates
HPF Underbrace/Skid plate
All Methanol components
Methanol switch
HPF install manual

Asking 13,500 Obo

Extra parts ALSO For Sale:

- Tubi Rumore exhaust section 2 and 3 for: $750/$1750 or $2500
- Saad Racing Diff Brace: $300
- Spare HPF/Bosch 7500cc Injectors: $450
- Used - Conti DWS 285-30-19 tires 7/10ths ; $300
- Used - LingLong L688 tires 245-35-19s 7/10ths; $200
- Used - Toyo Proxes 4 tires 245-35-19s 7/10ths ; $300
- New - Nitto Invo tires 245-35-19s ; $400
- Black CF HPF Air ram vent (Sold)
- Black CF DME Cover (Sold)
- New StopTech 345 x 32mm REAR Disc & Hat $850

* Used UUC stage 2 ceramic clutch and flywheel: $500
* spare black powder coated turbo intake
*
*


**** PREFER A LOCAL BUYER IN TEXAS BUT CAN AND WILL SHIP AT BUYERS EXPENSE *******

[Sticky]

GLWS!

[leonelhpfm3]

GLWS!

Thanks Sticky!

Price clarification/Simplification:

$13.5k w/ UUC Clutch & Flywheel

$13k w/o the UUC Clutch & flywheel

$12.5k w/o UUC Clutch/Flywheel & HPF Meth kit ( effectively making it an HPF Stage 1 Turbo kit )

Everything is Negotiable ;-)

[Ljc6485]

Is the kit still available or do know of another on for sale I'm looking don't really wanna go maxpsi

[Sticky]

don't really wanna go maxpsi

Any particular reason why?

[Ljc6485]

I have one car with hpf on it started with stage one it's just a lot easier to add and change the set up and retune Got a local guy that tunes don't really wanna feel stuck if I up and decide to build the block or change the fuel system out ext.

[Sticky]

I have one car with hpf on it started with stage one it's just a lot easier to add and change the set up and retune Got a local guy that tunes don't really wanna feel stuck if I up and decide to build the block or change the fuel system out ext.

I see.

Well, this is an old for sale post so I doubt it's around but you don't have to tune an S54 turbo setup on the factory DME.

[Ljc6485]

Yeah I know there's options out there just looking for quick effective way for what I got in mind but it may not happen that way