BB Flash issue

[franzzz]

Car : European 335i E91 08/2008
ECU :IJE0S

I used bb flash and bavarian cable in order to backup the ecu
Done after 1 hour

File patched with fuel table

Write the file and after 18 min (the end of step 3 ) this error appears :

FlashModel.Flash ECU Programming state = 0x06 Bad DAF/Map section. ECU will need to be written with a known good file

Any idea ?

[EvanL]

Sounds like the ECU needs a reset. Pull the negative battery terminal for a few minutes to allow it to reset then try again.

By the by, incredibly jealous of your N54 stuffed into a wagon!

[franzzz]

Sounds like the ECU needs a reset. Pull the negative battery terminal for a few minutes to allow it to reset then try again.

By the by, incredibly jealous of your N54 stuffed into a wagon!

TNX

The laptop has always worked at least until yesterday

Yesterday is anythings with old valid bin file and new .
0x06 still present after standard or full write
(fortunately I WinKFP)

next week i try to remove battery plug for 10 min in order to reset the ecu

[franzzz]

Update

The problem is not related to my pc
If i try ANY bimmerboost file in the download section (for the ije0s ecu) these are uploaded correctly on my car (only error 2A18 is present in the ecu due because my car is European and all the files in this forum are ripped from US car)

Any idea ?
anyone know the patch in order to remove the 2A18 error on US bin files ?

tnx