Maximum PSI (Max PSI) S54 / E46 M3 entry level turbo kit tuned on stock ECU/DME nearing completion, 467 wheel horsepower

[Sticky]

With Sticky's permission, I'll post up the dyno graph.

Your account won't let you but feel free to e-mail it: [email protected]

[Sticky]

Here's a dyno.

Details:
- first production customer's kit
- 2004 M3 6-spd
- stock engine, reflashed ECU software
- 93 octane fuel
- no cat (3" downpipe/section 1), stock section 2, aftermarket rear muffler
- 8psi boost
- done on a Superflow dyno (this dyno typically reads 5-6% less than a
Dynojet)

[flipm3]

That is one great looking graph!

Awesome work MaximumPSI and NickG!

[Sticky]

That is one great looking graph!

Awesome work MaximumPSI and NickG!

I like what I see but I much prefer to see dynojet graphs. Need to see the air/fuel as well.

For 8 psi though and pump gas, about 500 wheel horsepower is very respectable and quite nice.

[daemonicus]

is MaxPSI still waiting on getting some test mules on the road first before rolling into full retail production? and if so, how long will it be before this kit becomes "official"?

[Sticky]

is MaxPSI still waiting on getting some test mules on the road first before rolling into full retail production? and if so, how long will it be before this kit becomes "official"?

Well that's a dyno from a customer car so I'd say this is pretty much ready to go. They likely are taking care of local guys first and probably already have interest from people.

[import36]

that looks great NickG....i read somewhere you guys now have an SMG in the shop...that's what i have so i look forward to your updates on that car. keep up the great work...like Sticky said...500whp at only 8psi is pretty nice and to be honest would be enough for me on this car!

[Sticky]

.i read somewhere you guys now have an SMG in the shop...that's what i have so i look forward to your updates on that car.

Same, want to see the SMG work.

[NickG]

that looks great NickG....i read somewhere you guys now have an SMG in the shop...that's what i have so i look forward to your updates on that car. keep up the great work...like Sticky said...500whp at only 8psi is pretty nice and to be honest would be enough for me on this car!

Yes, an SMG car is at Maximum PSI getting the kit installed as well as other items (subframe reinforcement, etc.). I can't wait to hear how that car feels on the street with the turbo kit

[Crackers]

Very Nice résult

[JohnBlaze]

how much power does the catted downpipe lose in comparison?

[Sticky]

how much power does the catted downpipe lose in comparison?

good question.

[GG///M3]

Here's a dyno.

Details:
- first production customer's kit
- 2004 M3 6-spd
- stock engine, reflashed ECU software
- 93 octane fuel
- no cat (3" downpipe/section 1), stock section 2, aftermarket rear muffler
- 8psi boost
- done on a Superflow dyno (this dyno typically reads 5-6% less than a
Dynojet)

What does this equal to on a dynojet?

[Sticky]

What does this equal to on a dynojet?

Um... read the description.

[GG///M3]

Um... read the description.

It would be great to see an exact dynojet read out instead of a guess.

[Sticky]

It would be great to see an exact dynojet read out instead of a guess.

You have to ask Nick G and Max PSI then.

[GG///M3]

You have to ask Nick G and Max PSI then.

Nah its a given. A standard in the industry. All in time/timing.

[GG///M3]

oo and Happy New Year. Lets get it right this year.

[normcaldwell]

An intriguing kit; got a couple of questions.

1. Can the kit be tuned to run on 91 AKI fuel? That's the best piss I can get in Colorado.
2. Can you post pics of the underside where the charge pipe is? I'd like to see where it is relative to the existing control arm/suspension height.
3. Can you post pics of where the air filter is located?

Thanks, Norm

[M3ntal]

Nice work Mike R. and Nick G. Mike, I saw you at atco the day it got rained out not too long ago. Bummer I didnt get to see it go down the track.

I had a Technique tuning kit on my e36 back in the day. It was a trouble free kit. Mike R also is a stand up guy. He helped me out with my car when a intake pipe collapsed on itself killing my power... Spent a good amount of diagnosing and fixing it for me and barely charged me anything.

[0-60Motorsports]

Great work and numbers. Lets see some pics of the parts and kit installed.

[Irishace]

Any update here PSI?

[import36]

posted on their FB the other day....great looking kit. $10k price tag for catted 6speed version...

[Sticky]

posted on their FB the other day....great looking kit. $10k price tag for catted 6speed version...

What is the price for catless? Where is the pricing, specs, etc.?

[import36]

What is the price for catless? Where is the pricing, specs, etc.?

not sure Sticky...that is all that was posted...a pic and further down in the comments they stated it was $10k for the catless 6speed version. they are still finalizing the hardware for the smg...if i find out any more info i'll post in here.