RB Evo build and logs

[Brule]

Have a ECS Schwaben tool on its way it has been delayed in Sydney for over 10 days expecting it any day so i can check injector coding, and anything else it can read for me.

[Brule]

Fixed the hesitation about a week after the previous post.

I checked the coding for the injectors and a few were out. At the same time I reset adaptions with the then new Schwaben scanner tool.
I don't know which one fixed it but it's been good ever since.

[Brule]

Got it tuned by v8baits mate buraq and ran it at heap of events from track, drags and open track days.

Never had any issues besides getting into 2nd gear with soft bushings, it was a lot of fun and reliable.

power was around the 520-550 hp was my guess, it virtual dynoed around the 570hp range but it's taken with a grain of salt.

[Brule]

I've had RB Evos at my house for about 6 months.

I worked away for 3 months, then installed them, then renovated my house.

so I've just got a base tune on them now.

no other mod changes from last update except kwv3. I bought some 17s and Hoosiers drag tyres too.

i have all m3 control arms, larger sway bars but not installed. I have had Megan racing toe arms ordered from Ecs tuning since mid November but they keep updating me that they are back ordered.

[Sticky]

Title edited by your request @Brule

[Forced_Downunder]

Nice one mate.

Hoping mine will be back on the road by March with the Evo's too.

[Brule]

Did you have to rebuild your engine?

[Brule]

Only difference I've noticed so far is the iats are a few degree c colder or about 5 f overall just while cruising.

Its 30 degrees c every day here and I used to be around 100f or struggle to ever get down to 95f. Now it's average of 95f while cruising.

This is with an AD intercooler, largish one. Smaller then vtts one but the other large one.

[ms335i]

Fixed the hesitation about a week after the previous post.

I checked the coding for the injectors and a few were out. At the same time I reset adaptions with the then new Schwaben scanner tool.
I don't know which one fixed it but it's been good ever since.

What do you mean the coding was out on a few injectors? Here is my video I might be having the same issue as you.

[euphoricdork]

How come you switched from RB stealths to RB Evos??? @Brule

[Brule]

I'm a sucker for new stuff.

i wanted Evos the same time I ordered stealths as they weren't available yet.

as soon as Evos were available I got them.

[Brule]

[QUOTE=ms335i;747794]What do you mean the coding was out on a few injectors? Here is my video I might be having the same issue as you.

I didn't have any issues at idle just at 1500rpm at light or moderate load.

There are 6 numbers on each injector, two or three complete injector numbers that were different to the actual injector.

[Brule]

[Sticky]

https://youtu.be/4bRbXVJpY80

That actually looks like it hits hard.

[Brule]

[Forced_Downunder]

How much boost are you running mate?

[Brule]

Currently around 21psi.

[Brule]

Walk around video of current setup