Results 1 to 15 of 15
Thread: Custom N54 Single Turbo Kit 335i
-
04-13-2014, 03:09 PM #1
Spammer
- Join Date
- May 2010
- Location
- South Jersey
- Posts
- 1,664
- Rep Points
- 3,051.3
- Mentioned
- 39 Post(s)
- Rep Power
- 31
2 out of 2 members liked this post.
Reputation
Custom N54 Single Turbo Kit 335i
Hey guys,
I have moved on to a new platform (CTS-V), so I am selling my custom made single turbo kit. This fits a 335i, and may fit other cars; but I cannot confirm. This is a top-mount GT3582R w/ Tial .82 A/R housing and Tial 44mm wastegate (vented to atmosphere). It currently mates up to the factory style dual exhaust, or you can have an adapter fabricated to mate up to a single exhaust of your choice. I made 570WHP / 488WTQ @ 22psi through the stock exhaust with this setup. It will come with just about everything you need to install. You will need about 6' of 7/8" heater hose to relocate the coolant reservoir and probably a few miscellaneous fasteners and hose clamps. You will also need the tuning solution of your choice (I used JB4 G5 + Cobb) and a low pressure fuel pump solution. Feel free to P.M. me with any questions.
ASKING PRICE: $3200 O.B.O. shipped to lower 48 states.
The kit includes:
Garrett GT3582R turbo w/ .82 Tial housing
Tial 44mm external WG
Manifold - TIG welded Schedule 10 304SS w/ 1.25" primaries to 1.50" secondaries to 2.00" collector (nominal pipes sizes)
Downpipe
Downpipe to dual exhaust adapter
Dump tube
Oil line & oil drain
Water lines
Block-offs for unused oil / water connections
Modified coolant pipe for 6AT cars (nipple for trans cooler will need to be capped off for 6MT use)
Driver's side coolant reservoir w/ level sensor, cap, and power steering reservoir relocation bracket
Modified charge pipe w/ Tial BOV (clears driver's side coolant reservoir)
Turbo mount K&N air filter
PCV to filter hose
V-band clamps
Hot side charge pipe
MAC boost solenoid w/ P&P harness
N20 3.5 bar MAP sensor w/ P&P harness
Heat shield
NOTES:
The following pictures show the CURRENT condition of the parts after they were removed from my car. The manifold has been freshly sandblasted to remove some light surface rust, and can be coated, wrapped, or just left bare. The long O2 sensor standoffs were designed to protect the sensors from excessive heat (but the tubes are dual chambered to draw plenty of exhaust gasses to the sensor to maintain accuracy). This has been designed to connect to an aftermarket intercooler with 2.5" silicone couplers. I built this kit myself; but I am not a tuning shop or hardware manufacturer, so there are no warranties provided. I cannot sepparate any components at this time. I can accept PayPal or money order. Thanks for looking!!!
-
04-13-2014, 04:17 PM #2
Member
- Join Date
- Sep 2011
- Posts
- 1,279
- Rep Points
- 2,415.0
- Mentioned
- 27 Post(s)
- Rep Power
- 25
Reputation
Your kit looks great!
C6 Z06 - 600whp+ (Chuck MF'ing Norris)
'10 335i - 830whp (Bruce Lee)
'07 335i - 380whp (Dolph Lundgren)
-
04-13-2014, 04:31 PM #3
Member
- Join Date
- Jul 2011
- Location
- Omaha, NE
- Posts
- 103
- Rep Points
- 172.8
- Mentioned
- 19 Post(s)
- Rep Power
- 2
Reputation
Is that the real deal Garrett GT3582R turbo or an E-Bay knock off?
Do you have any pictures of the kit installed?
-
04-13-2014, 04:35 PM #4
Guest Vendor
- Join Date
- Jun 2011
- Location
- Denmark, Copenhagen
- Posts
- 608
- Rep Points
- 592.3
- Mentioned
- 40 Post(s)
- Rep Power
- 0
Reputation
Will you ship this to Denmark?
-
04-13-2014, 05:10 PM #5
Guest Vendor
- Join Date
- Jan 2013
- Location
- California
- Posts
- 674
- Rep Points
- 986.1
- Mentioned
- 32 Post(s)
- Rep Power
- 0
Reputation
Looks great.glws
-
04-13-2014, 05:36 PM #6
Spammer
- Join Date
- May 2010
- Location
- South Jersey
- Posts
- 1,664
- Rep Points
- 3,051.3
- Mentioned
- 39 Post(s)
- Rep Power
- 31
Reputation
Thank you! I kind of hate to part with it, but I no longer have the car!
Originally Posted by The Ghost
-
04-13-2014, 05:46 PM #7
Spammer
- Join Date
- May 2010
- Location
- South Jersey
- Posts
- 1,664
- Rep Points
- 3,051.3
- Mentioned
- 39 Post(s)
- Rep Power
- 31
Reputation
Yes, it is absolutely 100% genuine Garrett. I purchased it from Himni Racing. They have great prices! Originally Posted by LQQKOUT
Here's a pic of the turbo installed. I ditched the intake pipe after this photo was taken because it was too restrictive. The silicone elbow was collapsing at just 16 psi. Running a filter right on the turbo turned out to be the way to go. Just to be clear, the intake will not be included with the kit since it didn't meet my standards.
-
04-13-2014, 05:47 PM #8
Spammer
- Join Date
- May 2010
- Location
- South Jersey
- Posts
- 1,664
- Rep Points
- 3,051.3
- Mentioned
- 39 Post(s)
- Rep Power
- 31
Reputation
I wouldn't be opposed to that as long as you cover the shipping charges. At this point, I don't have any idea what that would cost, though.
-
04-13-2014, 05:54 PM #9
Member
- Join Date
- May 2013
- Posts
- 2,950
- Rep Points
- 992.0
- Mentioned
- 58 Post(s)
- Rep Power
- 10
Reputation
GLWS! Great option for someone that was just looking for a Stage 2 turbo option, this would blow them away!
2013 Audi S6 stock but shopping....
2014 RAM 2500 6.7 Cummins. Far from stock
-
04-13-2014, 05:54 PM #10
Regular User
- Join Date
- Jan 2010
- Location
- SoCal
- Posts
- 148,075
- Rep Points
- 47,180.7
- Mentioned
- 2523 Post(s)
- Rep Power
- 472
Reputation
Looks nice... GLWS.
BRAND NEW IN BOX 991.2 standard/non-pse SPW cat bypass pipe for sale - $899 shipped
New generic 991.2 PSE bypass pipes - $499 shipped
-
04-14-2014, 04:17 AM #11
Supporting Vendor
- Join Date
- Jul 2010
- Location
- Encino,CA
- Posts
- 9,962
- Rep Points
- 8,426.4
- Mentioned
- 311 Post(s)
- Rep Power
- 85
Reputation
Fantastic kit and price.
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
04-14-2014, 07:50 AM #12
Member
- Join Date
- Jul 2011
- Location
- Omaha, NE
- Posts
- 103
- Rep Points
- 172.8
- Mentioned
- 19 Post(s)
- Rep Power
- 2
Reputation
Do you have a downpipe also? I'm interested, but I have an XI and I'm not sure if it will clear the transfer case.
-
04-14-2014, 08:17 PM #13
Spammer
- Join Date
- May 2010
- Location
- South Jersey
- Posts
- 1,664
- Rep Points
- 3,051.3
- Mentioned
- 39 Post(s)
- Rep Power
- 31
Reputation
Yes, but I forgot to include that in the photo. There are a few other misc. pieces too that aren't shown. I currently have a deposit to buy from a member; but I will let everyone know if something happens. Thanks! Originally Posted by LQQKOUT
-
04-17-2014, 11:25 PM #14
Spammer
- Join Date
- May 2010
- Location
- South Jersey
- Posts
- 1,664
- Rep Points
- 3,051.3
- Mentioned
- 39 Post(s)
- Rep Power
- 31
1 out of 1 members liked this post. Reputation
Sold!!! Thanks for the interest! BimmerBoost > Tacos... Need I say more?
-
04-18-2014, 02:44 AM #15
Regular User
- Join Date
- Jan 2010
- Location
- SoCal
- Posts
- 148,075
- Rep Points
- 47,180.7
- Mentioned
- 2523 Post(s)
- Rep Power
- 472
Reputation
If anyone truly believes this site is better than tacos well then sir that is all the praise I would ever hope to hear.
BRAND NEW IN BOX 991.2 standard/non-pse SPW cat bypass pipe for sale - $899 shipped
New generic 991.2 PSE bypass pipes - $499 shipped
Welcome to a...
mask is now here!