COBB Stage 1+ FMIC Log analysis

[Artsoasis]

Hi,
I need some help analyzing my log I just made. I did a pull from 3rd to forth as instructed in the how to log diy. I just want to know if the tune is good for me.

[LostMarine]

looks like you only went up to 3k ish?

[Dfv2]

No, the CSV contains data showing a 3-6.5krm pull in 3rd with a shift into 4th. Just poorly logged and don't bother trying to graph these yourself.

Timing is too high and boost too low for cobb stg1+, this looks like a stock tune or a cobb stg0 map file. Reflash stg1+ and try again.

[Artsoasis]

I screwed up and ran under cob stage 1 drive. I'll post updated logs.

[Artsoasis]

Here are two logs with confirmed stage 1+ FMIC Aggressivedatalog15.zipdatalog17.zip

[Artsoasis]

Is there a reason I would only be hitting 10.5 psi on an aggressive tune?

[Dfv2]

You should be popping a CEL with boost related codes - looks like a boost leak. I'm going to take a shot in the dark here: you just installed a chargepipe and/or FMIC?

Tighten all your clamps, check all your connections.

[Sticky]

You should be popping a CEL with boost related codes - looks like a boost leak. I'm going to take a shot in the dark here: you just installed a chargepipe and/or FMIC?

Tighten all your clamps, check all your connections.

Thanks for helping him out, repped.