Hello, i just did three or four revision of my custom tune. Spoted few issues, which i would be happy if anybody help me:

1. boost is start falling at 5500, looks like something starts to happen there, also STFT start to climb up +20%. Already tried to add 5% WGDC at this area, boost act the same(this log).

2. in file i set 195-190 load request, but target on log is only cca 180. Spoted torgue limit 4 active for a brief second

I feel like its some newbie issue, as i seen on many dynocharts power band starts to fall around 5500rpm (my issue?) and there is some limitation on load/boost reguest on pure flash tune - no MHD or any other thirdparty.

Car is 2007 335ix AT
-Custom hybrids(bigger both in+ex wheels), oem actuators + rattlefixed and preloaded half a pin diameter.
-Some bigger alloy FMIC
-OEM blow off valves, not cracked(vacuum tested)
-3in downpipes,no cats, 2.5in free flow exhausts
-FuelIT stg1 pump setup(255 in series)
-Alpina AT flash

here i a link, i cant post them here yet(reputation) so try it: datazap.me/u/phob/verze04?log=1&data=3-6-17-18-21-22-27