Warm/Cold misfire cylinder 3. Interesting.
Well I had some misfire issues on cold start, and finally a injector gave up (stuck open) on a cold start, dealer changed all 3 injectors on bank2 (4,5,6)
Cold start misfires were gone and car was running great. Also changed the plugs right before they changed my injectors.
Now here is my issue... bank1 (1,2,3) still has the old injectors.
When I fully warm the car after a drive, then park the car.. After I let the car sit for say 2-3 hours, oil temp back down to lowest temp on the gauge (160). I go to start her, and it rumbles and shakes until the rpms settle to a easy nice idle.. But during that rumble, I get a cylinder 3 misfire.
Does this sound like somewhat of a injector issue again?
Cold starts are great. WOT car is running and logging perfect. PLugs are new. Injectors 4,5,6 are new. Misfire only on cylinder 3 no other codes.
Only happens when the car is warm, and I let it sit for a few hours and go back to start it.
27k miles, FBO, 93 octane. No meth or E85 at the moment.